產品中心 應用方案 技術文摘質量保證產品選型 下載中心業內動態 選型幫助 品牌介紹 產品一覽 聯系我們
- MiniSense 100振動傳感器中英文產品介紹
- 來源：賽斯維傳感器網 發表于 2014/6/28
Applications: Detect either continuous or impulsive vibration or impacts
Industries: Engine and Vehicle, Medical, Consumer Goods
Description: The MiniSense 100 is a low cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Pins are designed for easy installation and are solderable. Horizontal and vertical mounting options are offered. The active sensor area is shielded for improved RFI/EMI rejection. Rugged, flexible PVDF sensing element withstands high shock overload. Sensor has excellent linearity and dynamic range, and may be used for detecting either continuous vibration or impacts. The mass may be modified to obtain alternative frequency response and sensitivity selection (consult factory). The MiniSense 100 acts as a cantilever-beam accelerometer. When the beam is mounted horizontally, acceleration in the vertical plane creates bending in the beam, due to the inertia of the mass at the tip of the beam. Strain in the beam creates a piezoelectric response, which may be detected as a charge or voltage output across the electrodes of the sensor. The sensor may be used to detect either continuous or impulsive vibration or impacts. For excitation frequencies below the resonant frequency of the sensor, the device produces a linear output governed by the "baseline" sensitivity. The sensitivity at resonance is significantly higher. Impacts containing high frequency components will excite the resonance fre-quency, as shown in the plot above (response of MiniSense 100 to a single half-sine impulse at 100 Hz, of amplitude 0.9 g). The ability of the sensor to detect low frequency motion is strongly influenced by the external electrical circuit.
Features:
Low cost
Cantilever-type vibration sensor
High sensitivity at low frequencies
Active sensor area is shielded for improved RFI/EMI rejection
Excellent linearity and dynamic range
Rugged, flexible PVDF sensing element withstands high shock overload
典型應用: 連續或脈沖振動或沖擊檢測
行業: 發動機和機動車輛, 醫療, 消費電子和家用電器
產品描述:
MiniSense 100是一款采用懸臂梁結構的低成本振動傳感器，端部的質量塊使得傳感器在低頻時產生高靈敏度。其插針結構易于安裝和焊接，有水平安裝，垂直安裝和短插針可選。傳感器的工作區域采用自屏蔽結構，防射頻干擾和電磁干擾。柔性PVDF的一端固定，另一端懸空，使其能經受高頻的沖擊載荷。傳感器有良好的線性度和動態測量范圍，可以用來檢測連續振動和沖擊。可通過調整質量塊的重量達到不同的頻率響應和靈敏度（請與我們聯系獲取更多信息）。
特點:
低成本
懸臂式振動傳感器
低頻下的高靈敏度
屏蔽的工作區域，以防止射頻干擾和電磁干擾
優異的線性和動態范圍
耐用的柔性PVDF，抗高過載沖擊
MiniSense 100振動傳感器更多技術參數及規格書下載請瀏覽：http://www.sensorway.cn/sensors/341.html
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
