- 832M1系列加速度傳感器中英文產品介紹
- 來源：賽斯維傳感器網 發表于 2014/6/27
Applications: Asset Monitoring, Data Loggers, Impact Monitoring, Machine Health Monitoring, System Wake-Up Switch, Embedded Applications
Industries: Aerospace and Military, Engine and Vehicle, Medical, Consumer Goods, General Industry
Description: The Model 832M1 is a low cost, board mountable triaxial accelerometer. Featuring stable piezo-ceramic crystals, the accelerometer incorporates full power and signal conditioning with a maximum current consumption of 22 micro-amps. The model 832M1 is available in ±25g to ±500g ranges and provides a flat frequency response up to greater than 6kHz. The standard model 832 offers the same envelope with a lower maximum current consumption of 4 micro-amps.
Features:
Low Cost Triaxial Piezoelectric Accelerometer
<22µA Current Consumption
±25g to ±500g Dynamic Range
Full Power and Signal Conditioning
Hermetically Sealed
Wide Bandwidth to >6kHz
-40° to +125°C Operating Range
Circuit Board Mountable
典型應用: 設備監控，數據分析，沖擊測試，系統喚醒開關，嵌入式OEM應用
行業: 航天國防, 發動機和機動車輛, 醫療, 消費電子和家用電器, 工業控制
產品描述:
832M1是一款低成本的板載式三軸加速度，采用穩定的壓電陶瓷晶體，經過信號處理，最大功耗為22µA。產品量程為±25g至±500g，響應頻率可達6kHz。同類型的加速度傳感器832的功耗為4µA。
特點:
低成本三軸壓電式加速度傳感器
功耗：<22µA
動態量程：±25g ~ ±500g
板載式安裝
全密封
信號處理
帶寬：>6kHz
工作溫度：-40℃ ~ 125℃
832M1加速度傳感器更多技術參數及規格書下載請瀏覽：http://www.sensorway.cn/sensors/537.html
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
