- CTS 420位移變送器中英文產品介紹
- 來源：賽斯維傳感器網 發表于 2014/6/23
Applications: Process industry, Remote, oil field valve position monitoring, Ship-board turbine throttle position control, Paper mill head box position, Rolling mill roller gap feedback, Damper control on fossil fuel power plants
Industries: General Industry
Description: The CTS-420 Series is a 2-wire current loop position transmitter system especially suited to measurements in process industries. Each system consists of either an HCI Series LVDT linear position sensor or an R36AS RVDT rotary position sensor, along with an electronics module which provides a 4-20mA current loop output. The CTS-420 operates on an unregulated 10 to 36VDC supply voltage. The electronics module provides the position sensor with the required AC voltage excitation voltage and converts the AC voltage output into a smooth 4-20mA signal. The zero and span adjustment potentiometers, as well as the sensor and loop supply connection terminals, are all conveniently located on the front panel for easy installation and calibration.
Features:
4-20mA 2-wire current loop operation
Linear or rotary position sensing
Zero and span adjustable
Hermetically sealed (LVDT only)
Imperial or metric threaded core (LVDT)
Cable assembly up to 35ft. (optional)
典型應用: 過程控制，油田閥位測量，渦輪機節氣門位置控制，網前箱位置，輥隙反饋，火電廠風門控制
行業: 工業控制
產品描述:
CTS 420是雙線回路位移變送器系統，特別適用于制造業的閥位指示以及其它位移指示。CTS 420包括一個HCI系列LVDT直線位移傳感器或R36AS RVDT角位移傳感器和匹配的電子組件，可以通過雙線回路提供4~20mA輸出。
特點:
4~20mA輸出，兩線制
直線或角位移測量
零點和量程可調
焊接密封（僅適用于LVDT）
公制或英制鐵芯（LVDT）
電纜長度可達35英尺
CTS 420傳感器更多技術參數及規格書下載請瀏覽：
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
