- 86BSD壓力傳感器中英文產品介紹
- 來源：賽斯維傳感器網 發表于 2014/6/11
Applications: Level controls, Tank level measurement, Corrosive fluids and gas measurement systems, OEM equipment, Sealed systems, Manifold pressure measurement, Barometric pressure measurement, Submersible depth monitoring
Industries: General Industry
Description: The 86BSD is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. This 14-bit digital output pressure sensor supports I2C and SPI interface protocols, may come in a 3.3 or 5.0Vdc supply voltage and is designed for o-ring mounting. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. The 86BSD is designed for high performance, low pressure applications. A custom ASIC is used for temperature compensation, offset correction, and provides a digital output of 10~90% or 5~95%. For a similar sensor with stainless steel fittings, refer to the 85BSD digital output pressure sensor.
Features:
Mountable with O-ring seal
±0.1% Non-linearity
±1.0% Total Error Band
Cable/connector option
Low power option
I²C or SPI Interface protocols
典型應用: 液位控制，腐蝕性液體和氣體測量系統，OEM設備，密封系統，進氣口壓力，大氣壓力測量，投入式深度監測
行業: 工業控制
產品描述: 86BSD是小型的，多種介質兼容的，硅壓阻壓力傳感器，采用316L不銹鋼封裝，O型圈密封。該款數字式傳感器支持I2C和SPI接口，供電電壓為3.3Vdc或5.0Vdc。施加在不銹鋼隔離膜上的壓力通過硅油傳導至壓力芯片。 86BSD適合高性能低壓力的應用。溫度補償和偏差校正由特制的ASIC完成，并提供10~90%或5~95%的數字輸出。 MEAS還提供類似產品，例如帶塑料過程連接頭的LM。
特點:
O型圈密封
±0.1%非線性
±1.0%綜合誤差
可選電纜或連接頭輸出
可選低壓供電
I2C或SPI接口協議
86BSD壓力傳感器更多技術參數及規格書下載請瀏覽：http://www.sensorway.cn/sensors/685.html
北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。
